[comware] default CFG

#기본 설정

sysname DMZ-HPE5140 // hostname 설정

interface Vlan-interface 1 // IP 설정

ip address 116.120.11.254 255.255.255.128

ip route-static 0.0.0.0 0 116.120.11.129 // routing 설정

stp global enable // spanning-tree 활성화

stp mode pvst // mode : PVST

interface GigabitEthernet 1/0/8 // port speed 설정

speed 100

duflex full

 

ssh server enable

local-user admin // 관리계정 생성

password *****

service-type ssh terminal

authorization-attribute user-role network-admin

line vty 0 4 // 접속 method : ID/PW

authentication-mode scheme

snmp-agent // SNMP 설정

snmp-agent community read public

snmp-agent target-host trap address udp-domain 172.30.16.6 params securityname public

mirroring-group 1 local // mirroring 설정

mirroring-group 1 mirroring-port gigabitethernet 1/0/1 both

mirroring-group 1 monitor-port gigabitethernet 1/0/48

 

 

#설정 모드

system-view

 

 

save

>> 설정 저장

 

dis cu

>> 현재 설정 보기

 

dis vlan brief

>> vlan 보기

 

dis ip interface brief

 

#gbic 확인

<HPE>display transceiver interface

 

#password 길이 최소 설정

password-control length 4

 

#L2 CFG

hostname IRT_GY_1F_SW01   vlan 32   stp mode pvst   interface bridge-aggregation 1 link-aggregation mode dynamic   interface range ten 1/0/25 ten 1/0/26 port link-aggregation group 1   interface bridge-aggregation 1 port link-type trunk port trunk permit vlan all   interface vlan 32 ip address 8.200.32.5 24   ip route-static 0.0.0.0 0 8.200.32.1   interface range gi 1/0/1 to gi 1/0/24 port access vlan 32 loopback-detection action shutdown loopback-detection enable vlan all   local-user coc password simple adminadmin1 authorization-attribute user-role network-admin service-type terminal ssh   line aux 0 authentication-mode scheme idle-timeout 5 0   line vty 0 4 authentication-mode scheme idle-timeout 5 0   ssh server enable

 

#L3 CFG